#
# Config file for Conexant AccessRunner
#

# Driver mode
DRIVER_MODE=1  # 1 = normal, 2 = debug, 3 = normal+max speed (without ask adsl status), 4 = debug+max speed (without ask adsl status)

# Protocol
PROTOCOL_MODE=2  # 1 = RFC1483/2684 routed, 2 = PPP over ATM (pppoa), 3 = RFC1483/2684 bridged, 4 = PPP over Ethernet (pppoe)

# Paths
BINARY_PATH="/usr/sbin"
ATM_PATH=""

# ADSL
#  if OPEN_MODE is blank then cxload uses default mode acoording VID & PID
#  Values for OPEN_MODE are:
#    0 = auto selection, G.Handshake
#    1 = auto selection, T1.413
#    2 = G.Handshake
#    3 = ANSI T1.413
#    4 = ITU-T G.992.1 (G.DMT)
#    5 = ITU-T G.992.2 (G.LITE)
OPEN_MODE=

# ATM
VPI=8
VCI=35

# Specific for RFC1483/2684 routed/bridged
#  if IP_ADDRESS is blank in bridged mode then it uses DHCP to get IP
IP_ADDRESS=
NETMASK=255.255.255.0
GATEWAY=